ENCODER_REF_SM3 (FB)¶

FUNCTION_BLOCK ENCODER_REF_SM3 EXTENDS AXIS_REF_MAPPING_SM3

InOut:

Scope	Name	Type	Initial	Comment	Inherited from
Input	`wAxisStructID`	`WORD`	16#FE12		AXIS_REF_SM3
	`nAxisState`	SMC_AXIS_STATE	power_off	State of the axis according to the `PLCopen` state diagram: 0: `power_off` 1: `errorstop` 2: `stopping` 3: `standstill` 4: `discrete_motion` 5: `continuous_motion` 6: `synchronized_motion` 7: `homing` Parameter number: 1000	AXIS_REF_SM3
	`bRegulatorOn`	`BOOL`	FALSE	Parameter number: 1010	AXIS_REF_SM3
	`bDriveStart`	`BOOL`	FALSE	Parameter number: 1011	AXIS_REF_SM3
	`bCommunication`	`BOOL`	FALSE	`TRUE`: Communication OK Parameter number: 1012	AXIS_REF_SM3
	`wCommunicationState`	`WORD`	16#FFFF	Parameter number: 1013	AXIS_REF_SM3
	`uiDriveInterfaceError`	`UINT`		Drive interface error number Parameter number: 1014	AXIS_REF_SM3
	`bRegulatorRealState`	`BOOL`	FALSE	Parameter number: 1015	AXIS_REF_SM3
	`bDriveStartRealState`	`BOOL`	FALSE	Parameter number: 1016	AXIS_REF_SM3
	`wDriveId`	`WORD`	0	Parameter number: 1021	AXIS_REF_SM3
	`iOwner`	`INT`	0	Parameter number: 1022	AXIS_REF_SM3
	`fCycleTimeSpent`	`LREAL`		Parameter number: 1024	AXIS_REF_SM3
	`fTaskCycle`	`LREAL`	0.005	Parameter number: 1025	AXIS_REF_SM3
	`bError`	`BOOL`	FALSE	Parameter number: 1030	AXIS_REF_SM3
	`dwErrorID`	`DWORD`	0	Drive specific error identifier, parameter number: 1031	AXIS_REF_SM3
	`bErrorAckn`	`BOOL`	FALSE	Parameter number: 1032	AXIS_REF_SM3
	`bDisableErrorLogging`	`BOOL`	FALSE	Parameter number: 1036	AXIS_REF_SM3
	`fbeFBError`	ARRAY [0..g_SMC_NUMBER_FB_ERRORS] OF SMC_FBERROR		Parameter number: 1035	AXIS_REF_SM3
	`dwRatioTechUnitsDenom`	`DWORD`	1	Parameter number 1051	AXIS_REF_SM3
	`iRatioTechUnitsNum`	`DINT`	1	Parameter number 1052	AXIS_REF_SM3
	`nDirection`	MC_Direction	positive	Parameter number 1053	AXIS_REF_SM3
	`fScalefactor`	`LREAL`	1	Parameter number 1054	AXIS_REF_SM3
	`fFactorVel`	`LREAL`	1	Parameter number 1055	AXIS_REF_SM3
	`fFactorAcc`	`LREAL`	1	Parameter number: 1056	AXIS_REF_SM3
	`fFactorTor`	`LREAL`	1	Parameter number: 1057	AXIS_REF_SM3
	`fFactorJerk`	`LREAL`	1	Factor jerk Parameter number: 1058	AXIS_REF_SM3
	`fFactorCur`	`LREAL`	1	Parameter number: 1059	AXIS_REF_SM3
	`fFactorReference`	`LREAL`	1	The factor the home offset (fReference, parameter 1211) is multiplied by after conversion to increments. When converting from increments, the received value in increments is divided by the factor. Drivers can set this to -1 to invert the sign of the home offset.	AXIS_REF_SM3
	`iMovementType`	`INT`	SMC_AXIS_TYPE.finite	Parameter number: 1060	AXIS_REF_SM3
	`fPositionPeriod`	`LREAL`	1000	Parameter number: 1061	AXIS_REF_SM3
	`eRampType`	SMC_RAMPTYPE	trapez	Parameter number: 1062	AXIS_REF_SM3
	`byControllerMode`	`BYTE`	SMC_position	Parameter number:1091	AXIS_REF_SM3
	`byRealControllerMode`	`BYTE`	SMC_position	Parameter number: 1092	AXIS_REF_SM3
	`fSetPosition`	`LREAL`	0	Parameter number: 1100, 1	AXIS_REF_SM3
	`fActPosition`	`LREAL`	0	Parameter number: 1101	AXIS_REF_SM3
	`fAimPosition`	`LREAL`	0	Parameter number: 1105	AXIS_REF_SM3
	`fSavePosition`	`LREAL`	0	Parameter number: 1107	AXIS_REF_SM3
	`fSetVelocity`	`LREAL`	0	Parameter number: 1110, 11	AXIS_REF_SM3
	`fActVelocity`	`LREAL`	0	Parameter number: 1111, 10	AXIS_REF_SM3
	`fMaxVelocity`	`LREAL`	0	Maximum velocity of the drive (remote parameter) in [u/s] Parameter number: 1112,9	AXIS_REF_SM3
	`fSWMaxVelocity`	`LREAL`	0	Maximum velocity (software limit) in [u/s] Parameter number: 1113	AXIS_REF_SM3
	`bConstantVelocity`	`BOOL`	FALSE	Parameter number: 1115	AXIS_REF_SM3
	`fSaveVelocity`	`LREAL`	0	Parameter number: 1117	AXIS_REF_SM3
	`fSetAcceleration`	`LREAL`	0	Parameter number: 1120	AXIS_REF_SM3
	`fActAcceleration`	`LREAL`	0	Parameter number: 1121	AXIS_REF_SM3
	`fMaxAcceleration`	`LREAL`	0	Maximum acceleration of the drive (remote parameter) in [u/s²] Parameter number: 1122, 13	AXIS_REF_SM3
	`fSWMaxAcceleration`	`LREAL`	0	Maximum acceleration (software limit) in [u/s²] Parameter number: 1123	AXIS_REF_SM3
	`bAccelerating`	`BOOL`	FALSE	Parameter number: 1125	AXIS_REF_SM3
	`fSaveAcceleration`	`LREAL`	0	Parameter number: 1127	AXIS_REF_SM3
	`fMaxDeceleration`	`LREAL`	0	Maximum deceleration of the drive (remote parameter) in [u/s²] Parameter number: 1132, 15	AXIS_REF_SM3
	`fSWMaxDeceleration`	`LREAL`	0	Maximum deceleration (software limit) in [u/s²] Parameter number: 1133	AXIS_REF_SM3
	`bDecelerating`	`BOOL`	FALSE	Parameter number: 1135	AXIS_REF_SM3
	`fSaveDeceleration`	`LREAL`	0	Parameter number: 1137	AXIS_REF_SM3
	`fSetJerk`	`LREAL`	0	Parameter number: 1140	AXIS_REF_SM3
	`fActJerk`	`LREAL`	0	Parameter number: 1141	AXIS_REF_SM3
	`fMaxJerk`	`LREAL`	0	Maximum jerk of the drive (remote parameter) in [u/s³] Parameter number: 1142, 16	AXIS_REF_SM3
	`fSWMaxJerk`	`LREAL`	0	Maximum jerk (software limit) in [u/s³] Parameter number: 1143	AXIS_REF_SM3
	`fRampJerk`	`LREAL`	100000	Maximum Jerk, special value for sin² ramp type in [u/s³] Parameter number: 1144	AXIS_REF_SM3
	`fSaveJerk`	`LREAL`	0	Parameter number: 1147	AXIS_REF_SM3
	`fSetCurrent`	`LREAL`	0	Parameter number: 1150	AXIS_REF_SM3
	`fActCurrent`	`LREAL`	0	Parameter number: 1151	AXIS_REF_SM3
	`fMaxCurrent`	`LREAL`	100	Maximum current in [A] Parameter number: 1152	AXIS_REF_SM3
	`fSWMaxCurrent`	`LREAL`	0	Maximum user defined current in [A] Parameter number: 1153	AXIS_REF_SM3
	`fSetTorque`	`LREAL`	0	The set torque in [Nm] or [N] (linear) at the gearbox output. Parameter number: 1160	AXIS_REF_SM3
`fActTorque`	`LREAL`	0	Actual torque in [Nm] or [N] (linear) at the gearbox output. Parameter number: 1161	AXIS_REF_SM3
`fMaxTorque`	`LREAL`	0	The maximum torque in [Nm] or [N] (linear) at the gearbox output. Parameter number: 1162	AXIS_REF_SM3
`fSWMaxTorque`	`LREAL`	FPU.GetLRealSpecialVal(FPU.ESpecial_FP_Value.PosInf)	The maximum torque (software limit) in [Nm] or [N] (linear) at the gearbox output. Parameter number: 1163	AXIS_REF_SM3
`fSWLimitPositive`	`LREAL`	0	Position limit in positive direction in [u] Parameter number: 1200, 2	AXIS_REF_SM3
`fSWLimitNegative`	`LREAL`	0	Position limit in negative direction in [u] Parameter number: 1201, 3	AXIS_REF_SM3
`usiSWEndSwitchState`	`USINT`	0	Parameter number: 1204	AXIS_REF_SM3
`bSWLimitEnable`	`BOOL`	FALSE	Parameter number: 1205	AXIS_REF_SM3
`bHWLimitEnable`	`BOOL`	TRUE	Parameter number: 1206	AXIS_REF_SM3
`bStartReference`	`BOOL`	FALSE	Parameter number: 1210	AXIS_REF_SM3
`fReference`	`LREAL`	0	Parameter number: 1211	AXIS_REF_SM3
`bStartReferenceRealState`	`BOOL`	FALSE	Parameter number: 1212	AXIS_REF_SM3
`fOffsetPosition`	`LREAL`	0	Parameter number: 1215	AXIS_REF_SM3
`dwPosOffsetForResiduals`	`DWORD`	0	Parameter number: 1230	AXIS_REF_SM3
`dwOneTurn`	`DWORD`	0	Parameter number: 1231	AXIS_REF_SM3
`dwLastPosition`	`DWORD`	0	Parameter number: 1232	AXIS_REF_SM3
`bySwitchingState`	SMC_SWITCHING_STATE	SMC_ST_INITIALIZING	Parameter number: 1233	AXIS_REF_SM3
`iRestNumerator`	`DINT`	0	Parameter number: 1234	AXIS_REF_SM3
`iTurn`	`INT`	0	Parameter number: 1235	AXIS_REF_SM3
`dwActPosition`	`DWORD`	0	Parameter number: 1238	AXIS_REF_SM3
`usiBusBitWidth`	`USINT`	32	The bus bit depth. This is the number of bits used to send the actual and set position from and to the drive. Between 1 and 32.	AXIS_REF_SM3
`dwBusModuloMask`	`DWORD`	16#FFFFFFFF	The value (2^k - 1) where k is the bus bit depth.	AXIS_REF_SM3
`eBrakeControl`	SMC3_BrakeSetState	SMC_BRAKE_AUTO	Parameter number: 1017	AXIS_REF_SM3
`bBrakeClosedRealState`	`BOOL`	FALSE	Parameter number: 1018	AXIS_REF_SM3
`bOldError`	`BOOL`		Parameter number: 1033	AXIS_REF_SM3
`bVirtual`	`BOOL`		`TRUE`: Virtual drive. Parameter number: 1040	AXIS_REF_SM3
`bLogical`	`BOOL`		Parameter number: 1041	AXIS_REF_SM3
`fSetActTimeLagCycles`	`LREAL`	3	Parameter number: 1070	AXIS_REF_SM3
`diSetPosition`	`DINT`	0	Parameter number: 1108	AXIS_REF_SM3
`diActPosition`	`DINT`	0	Parameter number: 1109	AXIS_REF_SM3
`diSetVelocity`	`DINT`	0	Parameter number: 1118	AXIS_REF_SM3
`diActVelocity`	`DINT`	0	Parameter number: 1119	AXIS_REF_SM3
`diSetAcceleration`	`DINT`	0	Parameter number: 1128	AXIS_REF_SM3
`diActAcceleration`	`DINT`	0	Parameter number: 1129	AXIS_REF_SM3
`diSetCurrent`	`DINT`	0	Parameter number: 1158	AXIS_REF_SM3
`diActCurrent`	`DINT`	0	Parameter number: 1159	AXIS_REF_SM3
`diSetTorque`	`DINT`	0	Parameter number: 1168	AXIS_REF_SM3
`diActTorque`	`DINT`	0	Parameter number: 1169	AXIS_REF_SM3
`fSWLimitDeceleration`	`LREAL`	0	Deceleration in [u/s²] with which the system will brake in case of a software limit. Parameter number: 1203	AXIS_REF_SM3
`xWaitForHaltWhenStopInterruptsHome`	`BOOL`		`TRUE`: When MC_Home is interrupted by MC_Stop, then``MC_Stop.bDone`` is delayed until the drive reports that it has successfully halted. `bStartReferenceRealState` = `FALSE` Parameter number: 1213	AXIS_REF_SM3
`fSWErrorMaxDistance`	`LREAL`	0	Distance in which the drive has to reach standstill after an error has occurred. Parameter number: 1250	AXIS_REF_SM3
`eCheckPositionLag`	SMC3_CheckPositionLagMode	0	Parameter number: 1207	AXIS_REF_SM3
`fMaxPositionLag`	`LREAL`		Parameter number: 1208	AXIS_REF_SM3
`bPositionLagActive`	`BOOL`		Parameter number: 1209	AXIS_REF_SM3
`bModuloDoneByDrive`	`BOOL`		Parameter number: 1242	AXIS_REF_SM3
`diFollowingError`	`DINT`		Parameter number: 1243	AXIS_REF_SM3
`fFollowingError`	`LREAL`		Parameter number: 1244	AXIS_REF_SM3
`aCaptDesc`	ARRAY [0..7] OF SMC3_CaptureDescription		Parameter number: 1400	AXIS_REF_SM3
`xPersistentDataLoaded`	`BOOL`	FALSE		AXIS_REF_SM3
`strDriveInterfaceError`	`STRING(255)`			AXIS_REF_SM3
`adatAcyclic`	ARRAY [1..SMC3_gc_usiNumberAcyclicChannels] OF SMC3_DriveAcyclicTel			AXIS_REF_SM3
`nAbortCounter`	`UDINT`		Internal: counts the number of aborts. This counter simply wraps to 0 when exceeding 2^32-1, so use accordingly. Increased in method SetOwner().	AXIS_REF_SM3
`vMinRequiredVersion`	`VERSION`		The minimum version of SM3_Basic that the driver requires.	AXIS_REF_SM3
`bAvoidReversalOnHaltStop`	`BOOL`		Parameter number: 1260	AXIS_REF_SM3
`bConsiderLimitsOfAbortedMotionOnHaltStop`	`BOOL`		Parameter number: 1270	AXIS_REF_SM3
`bUpdateIOsInStop`	`BOOL`		Update the IOs if the application is stopped. Parameter number 1280	AXIS_REF_SM3
`bAutoRestart`	`BOOL`	TRUE	If TRUE, an implict SMC3_ReinitDrive is executed after the communication to the drive is established again after a communication loss (e.g. fieldbus slave no longer operational). If FALSE, an explicit call to SMC3_ReinitDrive is required after communication has been established again. (This is the behavior of SoftMotion versions before 4.18.0.0.) Default is TRUE if not set by the device parameter, i.e. the drive device can override the default. Parameter number 1281	AXIS_REF_SM3
`overrideFactors`	`SMRB.DynFactors`	STRUCT(fVel := 1, fAcc := 1, fJerk := 1, fTorque := 1)		AXIS_REF_SM3
`m_superimposed`	`SMC_SuperimposedData`		Internal: information of superimposed movements	AXIS_REF_SM3
Output	`strDriver`	`STRING(16)`			AXIS_REF_SM3
Output	`dwDriverVersion`	`DWORD`			AXIS_REF_SM3
Input	`usiEncoderBitWidth`	`BYTE`

Properties:

ChildNodeCount, inherited from AXIS_REF_SM3

Connector, inherited from AXIS_REF_SM3

Enable, inherited from AXIS_REF_SM3

FirstChildNode, inherited from AXIS_REF_SM3

Index, inherited from AXIS_REF_SM3

IsDeviceDiagInitialized, inherited from AXIS_REF_SM3

IsRootNode, inherited from AXIS_REF_SM3

NextSiblingNode, inherited from AXIS_REF_SM3

ParentNode, inherited from AXIS_REF_SM3

SiblingNodeCount, inherited from AXIS_REF_SM3

Methods:

BasicInit, inherited from AXIS_REF_SM3

CheckCurrentSupportedCommunicationState, inherited from AXIS_REF_SM3

CheckPositionLag, inherited from AXIS_REF_SM3

CheckSupportedCommunicationState, inherited from AXIS_REF_SM3

GetActValuesForCycle, inherited from AXIS_REF_SM3

GetDeviceErrorAsync, inherited from AXIS_REF_SM3

GetDeviceInfo, inherited from AXIS_REF_SM3

GetDeviceState, inherited from AXIS_REF_SM3

GetSetValuesForCycle, inherited from AXIS_REF_SM3

GetSpecificDeviceErrorAsync, inherited from AXIS_REF_SM3

GetSpecificDeviceState, inherited from AXIS_REF_SM3

IsDeviceEnabled, inherited from AXIS_REF_SM3

SetCommunicationState, inherited from AXIS_REF_SM3

SkipNextInputUpdate, inherited from AXIS_REF_SM3

SkipNextOutputUpdate, inherited from AXIS_REF_SM3