Object: Redundancy Configuration

The object contains the configuration for the CmpRedundancy and CmpRedundancyConnectionIP runtime system components. Configure the settings for this in the redundancy editor.

Note

Whether or not the following tabs are actually provided depends on the device and its device description.

For more information, see: Getting Started

Tab: Redundancy State	Displays the redundant system in a graphic Supports in the device selection and connection settings (path selection) Visualizes the current state of the system and displays the current operating mode Provides redundancy commands so that you can manually change the operating modes of the devices For more information, see: Redundancy State
Tab: Applications	Lists the loaded applications of the redundant system Provides commands so that you can manage the applications Tip Corresponds to the `Application` tab of the device editor For more information, see: Applications
Tab: Files	Allows for file access on the local system and the file system of the PLC Tip Corresponds to the `Files` tab of the device editor For more information, see: Files
Tab: Log	Lists the history of redundancy events of the PLC which has recorded its logger Tip Corresponds to the `Log` tab of the device editor For more information, see: Log
Tab: PLC Shell	Provides a PLC shell to execute commands on PLC 2 Tip Corresponds to the `PLC Shell` tab of the device editor For more information, see: PLC Shell

Tab: Redundancy Settings	For more information, see: Redundancy Settings
Tab Redundancy Link	Configures the redundancy link between PLC 1 and PLC 2 (communication settings) For more information, see: Redundancy Link
Tab: General	Configures the task, the watchdog, and the fieldbuses for the redundant operation For more information, see: General
Tab: Visualization	Configures the redundancy link between PLC 1 and PLC 2 for the optional use by the visualization. For more information, see: Visualization

Tab: Registered Areas

Configures the data areas which are synchronized

For more information, see: Registered Areas

Tab: Variables

Manages variables which have been declared in POUs and GVLs and which are kept synchronous in both PLCs

Tab: Addresses

Manages address ranges which are synchronously retained in both PLCs