Skip to main content

Object: Redundancy Configuration

The object contains the configuration for the CmpRedundancy and CmpRedundancyConnectionIP runtime system components. Configure the settings for this in the redundancy editor.

Note

Whether or not the following tabs are actually provided depends on the device and its device description.

For more information, see the following: Getting Started

Tab: Redundancy State

Displays the redundant system in a graphic

Supports in the device selection and connection settings (path selection)

Visualizes the current state of the system and displays the current operating mode

Provides redundancy commands so that you can manually change the operating modes of the devices

For more information, see the following: Redundancy State

Tab: Applications

Lists the loaded applications of the redundant system

Provides commands so that you can manage the applications

Tip

Corresponds to the Application tab of the device editor

For more information, see the following: Applications

Tab: Files

Allows for file access on the local system and the file system of the PLC

Tip

Corresponds to the Files tab of the device editor

For more information, see the following: Files

Tab: Log

Lists the history of redundancy events of the PLC which has recorded its logger

Tip

Corresponds to the Log tab of the device editor

For more information, see the following: Log

Tab: PLC Shell

Provides a PLC shell to execute commands on PLC 2

Tip

Corresponds to the PLC Shell tab of the device editor

For more information, see the following: PLC Shell

Tab: Redundancy Settings

For more information, see the following: Redundancy Settings

Tab: General

Configures the redundancy link between PLC 1 and PLC 2 (communication settings)

For more information, see the following: General

Tab: Fieldbus Settings

Configures the task, the timeout, and the fieldbuses for the redundant operation

For more information, see the following: Fieldbus Settings

Tab: Visualization

Configures the redundancy link between PLC 1 and PLC 2 for the optional use by the visualization.

For more information, see the following: Visualization

Tab: Registered Areas

Configures the data areas which are synchronized

For more information, see the following: Registered Areas

Tab: Variables

Manages variables which have been declared in POUs and GVLs and which are kept synchronous in both PLCs

Tab: Addresses

Manages address ranges which are synchronously retained in both PLCs

In this section: