ERROR (ENUM)ΒΆ
TYPE ERROR :
This data type describes errors which can occure using CODESYS J1939 Safety library.
- Attributes:
qualified_only
- InOut:
Name
Initial
Comment
NO_ERROR
16#0
No error occurred
CALLER_CONTEXT
16#10
Function block was called in the wrong contex.
PARAM_PRIO
16#20
Parameter SHM and SDM priority error
PARAM_REFRESH_TIME
16#21
Parameter refresh time invalid
PARAM_DATA_LENGTH
16#22
Parameter data length invalid
PARAM_SCT
16#23
Parameter SCT invalid
PARAM_SRVT
16#24
Parameter SRVT invalid
PARAM_PGN
16#25
Parameter PGN invalid
COMM_CORRUPTION
16#30
- SDG safety error - message corruption. Messages may be corrupted due to errors within a bus participant,
due to errors on the transmission medium, or due to message interference.
COMM_SCT
16#31
SDG safety error - unacceptable delay (SCT - SHM not arrived in time).
COMM_SRVT
16#32
SDG safety error - unacceptable delay (SRVT - SDM not arrived in time).
COMM_UNINTENDED_REPETITION
16#33
SDG safety error - unintended repetition of SHM message. Old not-updated messages may be repeated at an incorrect point in time.
COMM_SEQNUM_ORDER
16#34
SDG safety error - incorrect SHM sequence number order, e.g. SHM message lost.
COMM_SEQ_SHM_SDM
16#35
SDG safety error - incorrect sequence, SDM before SHM received.
COMM_SHM_DATA_LENGTH
16#80
SDG safety error - received SHM data length incorrect, 8 expected.
COMM_SHM_DATA_PAGE
16#81
SDG safety error - received SHM id Data Page incorrect, 0 expected.
COMM_SHM_EXT_DATA_PAGE
16#82
SDG safety error - received SHM id Extended Data Page incorrect, 0 expected.
COMM_SHM_PDU_SPECIFIC
16#83
SDG safety error - received SHM id PDU specific value incorrect.
COMM_SHM_PDU_FORMAT
16#84
SDG safety error - received SHM id PDU format value incorrect, 14 expected.
COMM_SHM_SRC_ADDR
16#85
SDG safety error - received SHM id source address incorrect.
COMM_SHMDATA_INV_DATA_PAGE
16#90
SDG safety error - received SHM data inverted SDM Data Page incorrect.
COMM_SHMDATA_INV_EXT_DATA_PAGE
16#91
SDG safety error - received SHM data inverted SDM Extended Data Page incorrect.
COMM_SHMDATA_INV_PDU_FORMAT
16#92
SDG safety error - received SHM data inverted SDM PDU format incorrect.
COMM_SHMDATA_INV_PDU_SPECIFIC
16#93
SDG safety error - received SHM data inverted SDM PDU specific incorrect.
COMM_SHMDATA_INV_SRC_ADDR
16#94
SDG safety error - received SHM data inverted SDM souce address incorrect.
COMM_SHMDATA_RESBIT
16#95
SDG safety error - received SHM data reserved data bit invalid.
COMM_SDM_EXT_DATA_PAGE
16#A0
SDG safety error - received SDM id Extended Data Page incorrect, check the intended connection.
COMM_SDM_DATA_PAGE
16#A1
SDG safety error - received SDM id Data Page incorrect, check the intended connection.
COMM_SDM_PDU_SPECIFIC
16#A2
SDG safety error - received SDM id PDU specific value incorrect, check the intended connection.
COMM_SDM_PDU_FORMAT
16#A3
SDG safety error - received SDM id PDU format value incorrect, check the intended connection.
COMM_SDM_SRC_ADDR
16#A4
SDG safety error - received SDM id souce address incorrect, check the intended connection.
COMM_SDM_DATA_LENGTH
16#A5
SDG safety error - received SDM data length incorrect, must be 0 < len <= 8.