Command: Rotate Program

Function: The command opens the Rotation parameters dialog where the rotation of the CNC path is configured.

Call: CNC menu

Requirement: A CNC path is open in the editor.

Constraint

Rotating the CNC path is possible under the following conditions:

. No usage

Angle (degrees)	Angle of rotation (in degrees) about the Rotary axis. Example: Given Rotation about the Z-axis The X-axis points to the right, and the Y-axis points downwards. The viewing direction is against the rotary axis (right-hand rule). For a negative value, rotation is performed clockwise. For a positive value, rotation is performed counterclockwise.
Axis of rotation	Selecting a rotary axis is possible only if the elements of the CNC path are all 3D elements. No selection if the CNC path of one of the following elements includes: G5 spline Parabola Ellipse 2D arc The rotary axis is defined by the parameters X, Y, and Z. Default: X: 0, Y: 0, Z: 1 --> rotation about the Z-axis
X	Default: `0.00000`
Y	Default: `0.00000`
Z	Default: `1.00000`
OK	The rotation is executed. The block numbers are assigned automatically.