Skip to main content

Diagnosis

Device tree: EtherNet/IP Scanner

In online mode, the device tree allows for a pinpointing of a pending diagnosis.

  • Green symbol: The device is in operation.

  • Error flag (red triangle): The device is unavailable. It is possible that the network configuration is wrong.

  • Orange triangle: The device is either not yet configured or the connection configuration is wrong. If the diagnostics flag is active, then you will find more information on the log page.

  • Diagnostic flag (red exclamation mark): The diagnostic flag of the respective remote adapter indicates that there is currently a log entry for exactly this device.

  • Error-cleared flag (gray exclamation mark): The error-cleared flag indicates that a previously pending error has been corrected.

Status page: EtherNet/IP Scanner

The status page displays an overview of the status of the scanner and the connected adapters.

Log page: EtherNet/IP Scanner

A filtered view of the PLC logger is displayed at both Scanner level and Adapter level.

The log page only shows the entries for the respective device. For example, this can be information or errors relating to the start-up phase of the device.