Tab: EtherNet/IP Scanner – Network Overview

The tab gives you an overview of the connected remote adapters. You can view and change the essential settings of the current configurations. This makes it easier to monitor the adapters.

Table 2. Adapter

List of remote adapters connected to the scanner

Name

Name of the adapter

The adapter is configured below an Ethernet/IP Scanner in the Devices view.

Example: _1734_AENT_EtherNetIP_Adapter

IP Address

IP address of the adapter

The address can be changed. Double-click to change it.

Table 3. Connections

List of connections of the remote adapter selected (on the left in the Adapter table) "Bulk change" feature for the RPI If you have selected multiple connections, then you can change the RPIs for all selected connections at the same time by holding down the Shift key and clicking (multiselection).
Add	Adds another connection An adapter must be selected for this. For more information, see the following: Dialog: New Connection, Add Connection
Delete	Deletes the selected connection from the configuration
Edit	Opens the Edit Connection dialog with the configuration of the selected connection. For more information, see the following: Dialog: New Connection, Add Connection

Connection Name	Example: `Assembly Exclusive Owner`
RPI (ms)	Example: `20`
Connection Path	Example: `20 04024 66 2C 64 2C 65`
Connection Type	`POINT2POINT`
Adapter	Name of the adapter Example: `_1734_AENT_EtherNetIP_Adapter`