Tab: Operation
The following options are also available in the context menu (right-click). Multiselection of devices is possible by holding down the Shift key. | |
Start All | Starts all listed services |
Stop All | Stops all listed services |
Start Selected | Starts the selected service |
Stop Selected | Stops the selected service |
Product | Name of the service |
State | Current status of the service |
Refresh | Gets the latest status of all elements and refreshes the tables |
Duplicate | Creates a new instance based on the currently selected service |
Export | Creates an export file in ZIP format. This contains the currently selected instance. |
Import | Opens a dialog for importing a previously generated export file |
The following options are also available in the context menu (right-click). Multiselection of devices is possible by holding down the Shift key. | |
Start All | Starts all listed VPLCs |
Stop All | Stops all listed VPLCs |
Start Selected | Starts the selected VPLC |
Stop Selected | Stops the selected VPLC |
Instance | Name of the VPLC |
State | Status of the VPLC |
Product | Type of VPLC (runtime, safe runtime, Edge Gateway, time provider) |
Dependencies | Other instances on which the selected instance depends. These other instances are started before the selected instance and stopped after it. |
| Opens the Add New Instance dialog |
| Delete individual or all instances. A running instance cannot be deleted."Purge" deletes all instances and installed images. |
| Refreshes the current status of all elements |
Different commands are displayed depending on the selected element. | |
Show Log | Displays the log of the respective element |
Disable Bootapplication | Disables the boot application of the runtime |
Open WBM | Opens CODESYS Web Based Management in the browser |
Change Service User | Opens a dialog to change the runtime user |
License Container Settings | Displays a dialog where you can change the container type used between EWF and UFC For more information about EWF and UFC, see the following: License Container / Firm Code / Product Code and Licensing on Read-Only File Systems via EWF. |
A dynamic list of all options for the selected element. A detailed description of the respective options can be found in the chapter Configure and Extend | |
Save | The command is enabled as soon as a setting is changed and no errors have been detected in the configuration. |
Name | Name of the new instance |
Filter | Filter for the list of available images |
Image | List of available images |
OK | Enabled when an image has been selected and a valid name has been specified. The new instance is created and displayed. |
Cancel | Closes the dialog; no changes are made. |
Available Adapters | The adapters currently available on the system. When an adapter has already been mapped to an instance, a short note is displayed in this list. |
Map to Instance | Determines whether this adapter is mapped to the currently selected instance |
Adapter | Cannot be modified Shows the name of the selected adapter |
IP | IP address of this adapter in the container. When this value is specified, the mask must also be specified. |
Mask | Network mask of this adapter in the container. When this value is specified, the IP address must also be specified. |
Identify | When an adapter has been selected, this button flash the network lamp on that adapter for a few seconds. This function must be supported by the driver. If this is not the case, then an error will be displayed. |
Network list | List of existing networks. By selecting a network and clicking Select, the network for the instance will be selected. |
| Clicking the icon will enable the input fields on the right side. This allows a new network to be configured. By clicking Save, the network is created and ready to be used. For more information about the individual fields, see the following: https://docs.docker.com/engine/network/ |
| When an item is selected in the network list, this button can be used to delete the network. |
