AlarmType (ENUM)¶

TYPE AlarmType :

Attributes:

qualified_only

InOut:

Name	Initial	Comment
RESERVED	16#0
DIAGNOSIS	16#1
PROCESS	16#2
PULL	16#3	With ARProperties.PullModuleAlarmAllowed(=0) subslot number 0x0001 – 0x8FFF used as “Pull submodule” and subslot number 0 used as “Pull module”.
PLUG	16#4
STATUS	16#5
UPDATE	16#6
REDUNDANCY	16#7
CONTROLLED_BY_SUPERVISOR	16#8	Logical “Pull” of a submodule to withdraw ownership
RELEASED	16#9	Logical “Plug” of a submodule to return ownership or trigger a reparameterization
PLUG_WRONG_SUBMODULE	16#A	Only an information for the application of the CMCTL.
RETURN_OF_SUBMODULE	16#B	Only this AlarmType is used for SharedInput submodules, too.
DIAGNOSIS_DISAPPEARS	16#C	Shall indicate a change of IOCS/IOPS from BAD to GOOD for a submodul
MULTICAST_MISMATCH	16#D
PORT_DATA_CHANGED	16#E
SYNC_DATA_CHANGED	16#F
ISOCHRONOUS_MODE_PROBLEM	16#10
NETWORK_COMPONENT_PROBLEM	16#11
TIME_DATA_CHANGED	16#12
DFP_PROBLEM_NOTIFICATION	16#13
MRDP_PROBLEM_NOTIFICATION	16#14
SYSTEM_REDUNDANCY_NOTIFICATION	16#15
MULTIPLE_INTERFACE_MISMATCH_NOTIFICATION	16#16
UPLOAD_RETRIEVAL	16#1E
PULL_MODULE	16#1F	With ARProperties.PullModuleAlarmAllowed(=1) AlarmType(Pull) shall signal pulling of submodule and AlarmType(Pull module) shall signal pulling of module