ERROR (ENUM)¶

TYPE ERROR :

This data type describes errors which can occure using CODESYS J1939 Safety Standard.

Attributes:

qualified_only

InOut:

Name	Initial	Comment
NO_ERROR	16#0	No error occurred
CL2_INTERNAL	16#20	TODO
NO_LICENSE	16#21	No license found.
RECEIVER_OPEN	16#22	Receiver already open
CAN_PARAMETER	16#30	A parameter has a wrong value
CAN_BAUDRATE	16#31	Baudrate for CANDriver is not valid.
CAN_29BIT_ID	16#32	CANDriver doesnt support 29bit CAN-ID’s.
CAN_DRIVER_NOT_CREATED	16#33	NetID might be wrong or the driver is not registered in “GatewayPLC/CoDeSysControl.cfg”. Example 1: 1 CAN card with 2 channels, channel 1: NetId = 0, channel 2: NetId = 1; Example 2: 2 CAN cards: NetId depends on the order the drivers are loaded.
CAN_NO_DRIVER	16#34	No CANDriver - create a valid CANBus Driver.
CAN_MESSAGE_QUEUE	16#35	The CANDriver sending queue is full.
SDG_TRANSMIT	16#40	error SDG transmission, a or more SDGs are not transmitted
SHM_UNEXPECTED	16#50	error unexpected SDM received
SDM_UNEXPECTED	16#51	error unexpected SHM received
SHM_DATALEN	16#52	error unexpected SHM datareceived