Master.AnalogInputGetFromPointNum (METH)¶

METHOD AnalogInputGetFromPointNum : Error

Get the value of Analog Input datapoint (DNP3 object group 30 “analog inputs”) with given point number (0 .. MaxPointNum). Returns PointNotExistent, if a datapoint with the given point number doesnt exist, OK otherwise.

InOut:

Scope	Name	Type	Comment
Return	AnalogInputGetFromPointNum	Error
Input	pointNumber	UINT	Point number.
Output	value	AnyNumber	Value
	flags	USINT	Flags. Flag values are OR’d combinations of the following: DNPDEFS_DBAS_FLAG_ON_LINE - the point has been read successfully DNPDEFS_DBAS_FLAG_RESTART - the field device that originated the data object has been restarted. This device may be the deviced reporting this data object. DNPDEFS_DBAS_FLAG_COMM_LOST - the device reporting this data object has lost communication with the originator of the data object DNPDEFS_DBAS_FLAG_REMOTE_FORCED - the state of the binary object has been forced to its current state at the originating device DNPDEFS_DBAS_FLAG_LOCAL_FORCED - the state of the binary object has been forced to its current state at the device reporting this data object DNPDEFS_DBAS_FLAG_OVER_RANGE - the digitized signal or calculation is greater than the type specified in TMWTYPES_ANALOG_VALUE. If the SCL determines that the value returned cannot fit in the type specified by the object variation read it will set this OVER_RANGE bit. DNPDEFS_DBAS_FLAG_REFERENCE_CHK - the reference signal used to digitize the signal is not stable, and the resulting digitized value may not be correct.
	hasTimeStamp	BOOL	Has a valid time stamp.
	timeStamp	LDATE_AND_TIME	Time stamp reported - valid if hasTimeStamp = TRUE, invalid otherwise.