Search

CODESYS Control for IOT2000 SL

CODESYS Control for IoT2000 SL provides a CODESYS runtime for products from the SIMATIC series IoT2000.

  • SIMATIC IOT2020

  • SIMATIC IOT2040

Runtime properties

The CODESYS Control for IoT2000 SL runtime does not necessarily fulfill hard real-time demands because its scheduling method depends on the operating system. However, if the operating system is configured accordingly (for example as RT preempt patch), then the time behavior is adapted and the jitter times are minimized.

Edge Gateway functionality

For more detailed information about the Edge Gateway functionality, see the help for CODESYS Edge Gateway for Linux. To enable the Edge Gateway functionality and to connect the Edge Gateway to the Automation Server, you can use the CODESYS Automation Server Connector or the Service Tool. For more information about this, see the help for the CODESYS Automation Server in the chapter "Connecting an Edge Gateway to the Server and Entering PLCs". Note also the "Security Notices for the Edge Gateway" in the help.

Support of IO modules from the Simatic IOT2000 line

In CODESYS Forge, you will find the sample project "IOT2000 GPIO Demo" which demonstrates how to use IO modules from the SIMATIC IOT2000 line on an IOT2000 with CODESYS.

For more information, see: Product information: SIMATIC IOT2000

Distribution scope of CODESYS Control for IoT2000 SL

  • Debian runtime system file (package as DEB file)

  • Plug-in for the CODESYS Development System

  • Device description for the IoT2000 hardware

You can identify your IoT2000 by clicking Device → Flash current device on the Communication Settings tab of the device editor.